1. Manuals
  2. Brands
  3. SmartSafe Manuals
  4. Test Equipment
  5. iSmartTool Series
  6. User manual

SmartSafe iSmartTool Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
iSmartTool Series User Manual
Copyright Information
Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO.,LTD. (also called
SMARTSAFE for short). All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying and recording or otherwise,
without the prior written permission.
Statement: SMARTSAFE owns the complete intellectual property rights for the
software used by this product. For any reverse engineering or cracking actions
against the software, SMARTSAFE will block the use of this product and reserve
the right to pursue their legal liabilities.
Disclaimer of Warranties and Limitation of Liabilities
All information, illustrations, and specifications in this manual are based on the
latest information available at the time of publication.
The right is reserved to make changes at any time without notice. We shall not
be liable for any direct, special, incidental, indirect damages or any economic
consequential damages (including the loss of profits) due to the use of the
document.
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iSmartTool Series and is the answer not in the manual?

Questions and answers

Related Manuals for SmartSafe iSmartTool Series

Summary of Contents for SmartSafe iSmartTool Series

  • Page 1 Copyright Information Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO.,LTD. (also called SMARTSAFE for short). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying and recording or otherwise, without the prior written permission.
  • Page 2 Series User Manual Important Safety Precautions To avoid personal injury, property damage, or accidental damage to the product, read all of the information in this section before using the tool. DANGER • When an engine is operating, keep the service area well-ventilated or attach a building exhaust removal system to the engine exhaust system.
  • Page 3 Series User Manual  Automotive batteries contain sulfuric acid that is harmful to skin. In operation, direct contact with the automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.  Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clear the outside of the equipment when necessary.

  • Page 4: Table Of Contents

    Series User Manual Table of Contents 1 Introduction·························· 1 1.1 Package List·····························1 1.2 Components & Controls························3 1.3 Technical Parameters·························4 2 Initial Use···························· 4 2.1 Charging & Turning On························ 4 2.2 Printer Setting····························4 2.3 Basic Operations ···························6 2.4 Change System Language·······················6 2.5 Network Setup ····························6...

  • Page 5: Introduction

    Series User Manual 1 Introduction 1.1 Package List The following accessories are for reference only. Please consult from the local agency or check the package list supplied with this tool together. For iSmartTool 601Max Item Descriptions iSmartTool Indicate the test result.
  • Page 6 Series User Manual For iSmartTool 601BT Item Descriptions iSmartTool 601BT Indicate the test result. tool Collect the tool to the vehicle’s DLC Diagnostic cable (Data Link Connector) port. Battery cable Connect the vehicle battery to perform clamps the battery detection.

  • Page 7: Components & Controls

    Series User Manual 1.2 Components & Controls Connects the diagnostic cable to POWER key - Press it to turn the the vehicle’s DLC (Data Link tool on/off. Connector) port. LCD screen – Indicates the test Circular connector – Connects results.

  • Page 8: Technical Parameters

    Series User Manual 1.3 Technical Parameters Operating system: Android 10 Memory: 4GB (iSmartTOOL 601Max) / 2GB (iSmartTOOL 601BT) Storage: 64GB (iSmartTOOL 601Max) / 32GB (iSmartTOOL 601BT) Screen: 5.99 inch capacitive touch screen with a resolution of 720 x 1440 pixels Camera: Rear-facing 8.0MP camera...
  • Page 9 Series User Manual opened. 2. Place the unpacked thermal paper into the compartment with its starting end approaching to the paper outlet. Reversing paper direction will result in that no results will be printed out. 3. Pull out some printing paper and introduce it along the slot until it comes out of the paper outlet shown as below.

  • Page 10: Basic Operations

    Series User Manual 2.3 Basic Operations Single-tap: To select an item or launch a program. Double-tap: To zoom in so that the text on a webpage appears in a column that fits your device’s screen. Long press: Tap and hold on the desired vehicle software to delete Slide: To jump to different pages.

  • Page 11: Register & Download Diagnostic Software

    Series User Manual 2.6 Register & Download Diagnostic Software Tap Login on the upper right corner of the Job menu, the following login popup will appear on the screen. A. If you are a new user, tap New Registration and follow the on-screen instructions to finish the registration.

  • Page 12: Job Menu

    Series User Manual 2.7 Job Menu The following modules are included. Battery: Perform the battery detection and battery matching. See Chapter 4. TPMS(only applies to iSmartTool 601Max): Configure the tool as a professional Tire Pressure Monitoring System (TPMS) service tool. It provides ability to perform all kinds of various TPMS functions.

  • Page 13: Vehicle Diagnosis

    Series User Manual 3 Vehicle Diagnosis 3.1 Preparation  The vehicle ignition is turned on.  The vehicle battery voltage range is 11-14 volts.  The throttle is in the closed position.  Find DLC location. The DLC (Data Link Connector) is usually located 12 inches from the center of the instrument panel, under or around the driver’s side for most vehicles.

  • Page 14: Start Diagnostics

    Series User Manual 3.3 Start Diagnostics Tap a corresponding diagnostic software logo, and then follow the on-screen instruction to access the diagnostic software. Take Demo (Version 15.32) as an example to demonstrate how to diagnose a vehicle. 1). Select diagnostic software version: Tap the DEMO to go to Step 2.
  • Page 15 Series User Manual Help: View the DTC help information. Compare Results: Tap to select the pre-repair report to compare. By comparison of the pre- and post- repair reports, you can easily identify which DTCs are cleared and which remain unfixed.
  • Page 16 Series User Manual Explanation of terms: Freeze Frame: A snapshot of critical parameter values at the time the DTC is set. Help: View the help information. Code Search: Search for more information about the current DTC online. Report: Save the current data in text format. All reports are saved in Reports ->...
  • Page 17 Series User Manual procedure, ALWAYS have a second person help you. Trying to drive and operate the diagnostic tool at the same time is dangerous,and could cause a serious traffic accident. Tap Read Data Stream and select the desired data stream items to enter the data stream reading page, which is the Value default mode displaying the parameters in texts and shows in list format.

  • Page 18: Feedback

    Series User Manual Graph: View the parameters in waveform graphs of all data stream items. When in graph mode, the following operations are supported:  Combine / : Combine different data stream items for data comparison.  Value: View the parameters in text format.

  • Page 19: Battery

    Series User Manual indicating the process status of the diagnostic feedback. C. Offline list Tap it to enter the diagnostic feedback offline list page. Once the tool gets a stable network signal, it will be uploaded to the remote server automatically.
  • Page 20 Series User Manual 2. Tap Battery -> Out-of-car inspection on the tool, the following screen will appear: 3. Tap to scan the barcode on the battery or manually input the code printed on the battery if necessary. Or tap Next Step to enter the next step.
  • Page 21 Series User Manual Note: Where the SOC and SOH indicates the State of Charge and State of Health respectively. 4.1.2 In-car Inspection In-car inspection indicates that the battery connects to loading devices, such as engine, etc. In this mode, the following tests can be done in a sequence of battery test, start test and charging test.
  • Page 22 Series User Manual automobile starting motor sweeps the bore, resulting in the increase of self-friction of starting motor. The charge test mainly detects and analyzes the vehicle charging system, including generator, rectifier, rectifier diode, etc. Through this test, we can know that the output voltage of the generator, the rectifier diode, and the charging current is normal or not respectively.
  • Page 23 Series User Manual 5. Tap Next and follow the on-screen prompts to do other tests until the whole test is completed. Precautions on battery test The accuracy of battery voltage, charging voltage, start voltage is 0.01V in test results; CCA (Cold Cranking Amps) precision is 5CCA.

  • Page 24: Battery Matching

    Series User Manual 4.2 Battery Matching This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.

  • Page 25: Program Tpms Sensor

    Series User Manual Notes: 1. For early magnet-activated sensors, place the magnet over the stem and then place the tool alongside the valve stem. 2. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the tool alongside the stem while tapping Active.
  • Page 26 Series User Manual Note: Do not place the device close to several sensors at the same time, or the diagnostic tool will detect more sensors, which may result in programming failure. Method 1 – Auto Create This function is designed to program the specific sensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID.

  • Page 27: Tpms Learning

    Series User Manual 2. Place a sensor close to the TPMS antenna of the tool, and tap Replication. 3. Tap Program to write in the copied sensor data to the sensor. Note: Once programmed with Replication, the specific sensor can be installed in the wheel directly to be mounted on the vehicle and the TPMS warning light will turn off.

  • Page 28: Maintenance

    Series User Manual 6 Maintenance This module provides an easy dial to quickly access the most commonly performed service functions as follows.  Oil Reset Service  Electronic Parking Brake Reset  Steering Angle Calibration  ABS Bleeding  TPMS (Tire Pressure Monitor System) Reset ...
  • Page 29 Series User Manual 6.3 Steering Angle Calibration This function enables you to reset the steering angle, after replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body.
  • Page 30 Series User Manual to the injector code of the corresponding cylinder, so as to more accurately control or correct cylinder injection quantity. It needs to be performed in the following cases: After the ECU or injector is replaced. 6.9 Battery Maintenance System Reset...
  • Page 31 Series User Manual 6.14 Sunroof Initialization This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc. 6.15 Suspension Calibration This function enables you to adjust the height of the body.

  • Page 32: Update

    Series User Manual 6.24 AdBlue Reset (Diesel Engine Exhaust Gas Filter) After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required. 6.25 NOx Sensor Reset NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust.

  • Page 33: Personal Center

    Series User Manual braking system. It needs to work with the compatible Videoscope device. For more details, please refer to the User Manual included with the module. 9 Personal Center This function allows users to manage personal information and VCI.
  • Page 34 Series User Manual 9.10 Clear cache It allows you to clear the App cache. Clearing the cache will restart the App. 9.11 About The software version information and disclaimer are included. 9.12 Login/Logout To logout the current user ID, tap Logout.
  • Page 35 Series User Manual ISED Warnning: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 36 The exclusive remedy for any automotive meter found to be defective is repair or replacement, and SMARTSAFE shall not be liable for any consequential or incidental damages.

This manual is also suitable for:

Ismarttool 601maxIsmarttool 601bt

Table of Contents