Repeat Interval; Call Manager; Range Test - pagertec TRACKSTAFF V3 User Manual

2. REPEAT INTERVAL

With this feature you have the option to choose how much time between each repeat call.

3. CALL MANAGER

If your system came with a Manager Pager, this feature allows you to alert the manager and
let them know which server has not come back to the pick area. If this feature is turned on,
staff will always need to return and shut off their call to avoid paging manager pager.

4. RANGE TEST

This feature allows you to do a range test with your transmitter to determine what distance your
transmitter will cover.
● To activate this feature just press "Enter" on the Range Test Option.
● Take a pager you would like to test the range with.
● Every 5 seconds a beep will go off on the pager to signal the page was received.
Once you stop hearing the beeps you will know you are out of range. To exit the testing
feature press "Cancel". If you need more range Pagertec provides signal repeaters to increase
range.
5. SET ALERT MODE
With this feature you can have the option of changing your pagers alert type.
To change the alert type of your pagers follow the below instructions:
1. At the "Set Alert mode" menu press the "ENTER" key
Select one of 1~6 Alert modes then press "ENTER" key.
1. LED
2. LED / Vibe
3. LED / Beep
4. LED / Vibe / Beep
5. Vibe
6. Beep
9