Use the "▲""▼" key to scroll through these 6 alert modes.
Pagers that have successfully received the change alert mode message will blink all LED
lights. At this point, all of the pagers in your system should alert with the alert mode that
you selected.
Press "Cancel" key to exit, and return to the main menu.
6. SET ALERT TIME
With this feature, you can set the alert time how long the pager alerts when the pager has
received the signal from the transmitter:
To change the Alert time of your pagers, follow these instructions:
1. At the "Set Alert Time" menu press "Enter"
2. Use the "▲""▼" key to scroll through the different times
3. Select one of 9 Alert times as below then press "Enter"
1. 2 SEC
2. 5 SEC
3. 10 SEC
4. 15 SEC
5. 30 SEC
6. 60 SEC
7. 90 SEC
8. 120 SEC
9. Continued Alert (Will shut off when returned to the charger or silenced by silence button)
• The pagers will now respond with your new selected alert time mode.
Press "Cancel" key to exit, and return to the main menu.
10