Table of Contents
Advertisement
MAC users
Attention:
The following is the basic RAID changing on your HDPro. Please read through CalDigit RAIDShield Manual for
detailed steps and many other functions.
Changing RAID Settings:
Data on your HDPro will be erased as the processes will format the drives. Backing up
your data on another HDPro is highly recommended.
Your HDPro is pre-configured with RAID 5 mode under Mac OS (Out of the box). If you want to select a different
RAID setting, please follow these steps.
1.
Please follow the instructions of Connecting the HDPro to the machine & Power HDPro On/OFF from the
sections above.
2.
Please follow the instructions of Initialize and Format HDPro from the section above.
3.
Run the CalDigit RAID Shield program.
4. Click the 'Add Controller' on the upper left corner.
5. Choose the HDPro that you want modify.
6. Verify the information. Enter the password(Default password: 00000000), and Click 'Add' button.
25
25
Advertisement
Table of Contents
