Table of Contents
Advertisement
Configure RAID Level
Important Note: You can only modify the Raid settings for you S2VR by using the S2VR
Manager software. The hardware RAID changing function on your S2VR Duo back panel
is disabled as default.
SOFTWARE RAID CHANGE
YOU MUST DELETE YOUR S2VR RAID SET ON DISK UTILITY WHENEVER YOU ARE
CONFIGURING YOUR S2VR INTO A NEW RAID SETTING. OTHERWISE YOUR SYSTEM
WILL STILL READ THE OLD SETTING FROM SYSTEM MEMORY, WHICH WILL CAUSE
FALSE INFORMATION ON DISK UTILITY.
Your data will be lost as this process will reformat your drives.
Backing up your data on another S2VR Duo is highly recommended.
YOU MUST RESTART YOUR COMPUTER AFTER EVERY RAID SETTING CHANGE.
HOWEVER, FREQUENTLY CHANGING YOUR S2VR SETTING IS NOT SUGGESTED. IF
YOU ARE NOT SURE ABOUT WHICH RAID SETTING BEST SUIT YOUR PROJECT,
PLEASE USE THE ADVANCED MODE ON YOUR S2VR MANAGER.
13
Advertisement
Table of Contents
