Table of Contents
Advertisement
Hardware Requirements
• PC or Mac with an available PCI-Express / PCI-X slot 500 Mhz or faster**
• CD-ROM drive
• 1GB of RAM minimum
**Note: You may be able to install the HDPro solution into an older Mac or PC, however the overall
performance will be slower than with newer systems. For uncompressed HD video editing,
we recommend a Dual G5 or newer CPU with 1GB machine or better.
CalDigit HDPro RAID controller and PCI-Express / PCI-X Card
HDPro RAID Controller Card (build within the HDPro unit)
1. Battery backup module connector
2. Serial port
3. Fan connector
4. PCI-Express x 4 connector
5. LCD panel connector
6. Backplane connection
7. DDR RAM Module Socket
Controller Card Memory Upgrade
DDR RAM is used to expand the cache capabilities of the controller. Follow the instructions below on how to insert the
memory module. (
st
DDR 1
generation only, DDR2 will
1. Undo the white clips on either end of
the connector.
2. Slide the DDR RAM module into the
connector and push firmly into place
until the white clips attach to the DDR
RAM module.
PCI-Express / PCI-X Connector Card
1. DIP switches
2. PCI-Express connector
3. Interface cable connection
1
7
6
NOT
work!)
2
3
4
5
8
8
Advertisement
Table of Contents
