Raid 0 Or Raid - CalDigit T4 User Manual

Mac OS X - RAID 0 or RAID 1
If the T4 is currently in a RAID set, users will need to delete the current RAID before creating a new
RAID set. If your T4 is not configured into a RAID set you can skip to step 4.
WARNING
1
Launch the CalDigit Drive Utility Software
2
Click on the "Disk Utility" button on the left hand side of the window.
3
Click the "RAID Management" button and then click on "Delete RAID Sets". Then click on "Yes"
to proceed and the current RAID set will be deleted.
Deleting the RAID set will delete all data on the T4.
Back-up your data before proceeding.
CalDigit
11