Initialize And Format Hdpro (Windows) - CalDigit HDPro User Manual

Windows Users
Attention:
Your HDPro is pre-configured under Macintosh OS environment; and Windows does
format on Macintosh OS system. Windows users
Initialize and Format HDPro:
Data on your HDPro will be erased as the initialize and format processes will format the
drives. Backing up your data on another HDPro is highly recommended.
CalDigit HDPro requires the RAIDShield Server to run in the back ground. The
RAIDShield Server is part of the installation file of CalDigit RAIDShield. (For detail,
please read the CalDigit RAIDShield Manual.)
Your HDPro is pre-configured with RAID 5 mode under Mac OS (Out of the box). If you want to change the
project for your PC, please follow these steps.
1. Please follow the instructions of Connecting the HDPro to the machine & Power HDPro On/OFF from the
sections above.
2. A system message will appear as the Windows mounts the HDPro.
3. (If you are installing the HDPro on to the PC for the first time) please insert the provided installation disc into
computer's CD-ROM.
4. Follow the OS hardware wizard's instruction. (HDPro's driver can be found in the CD's windows driver folder)
5. Click 'OK', and system will install the driver and GUI into the system OS.
6. A system confirm message will promote after installation complete.
CalDigit RAIDShield, then restart your
MUST initialize and re-format the HDPro.
computer.)
NOT recognize the file
(Please run the installation file for
13
13