Page 2
Apple, Apple Logo, Mac, the Mac logo, FinalCut Pro, Macintosh, are trademarks of Apple Computer Inc. Microsoft, Windows and Windows Logos are registered trademarks or trademarks of Microsoft Corporation. All other trademarks are the property of their respective owners. notice.
Installing the PCI card Turn off your computer and unplug the AC power C. Installing the PCI card...
Page 11
Remove cover from computer. C. Installing the PCI card...
Page 12
Always put the PCI card in Slot #3 or Slot #4 to PLEASE NOTE: have an AJA or Blackmagic Design capture card installed on your computer, please follow these instructions: /System/Library/CoreServices C. Installing the PCI card...
Page 13
placed in slot #3. C. Installing the PCI card...
Page 14
PCI card + Blackmagic Design: CalDigit PCI C. Installing the PCI card...
Page 15
outside the computer. C. Installing the PCI card...
Page 17
Install the CalDigit Driver. Insert the provided CD into the computer, or for the latest driver, please go to http://www.caldigit.com/support.asp. Press the power switch to turn on the HDPro2. When installation is complete, restart the computer. D. Installing RAID Shield...
Page 18
Your drive will appear on your desktop. drive format. Congratulations! Your HDPro2 is ready to use. Please visit us at www.caldigit.com to register your product. D. Installing RAID Shield...
Page 19
Using RAID Shield "RAID Shield." Click "Scan Controller". Select your HDPro2. Type in the new array name. Click "Add." E. Using RAID Shield...
Page 20
Now RAID Shield is showing all the detailed The RAID Shield utility is a quick and easy way necessary for day to day use. If you've followed the ready for use. E. Using RAID Shield...
Page 26
Windows Start Sliding the drive into the unit, starting at drive-locking arm inwards until it clicks into place. push the drive-locking arm inwards until it clicks into place. B. Installing Drives...
Page 27
Windows the remaining drives. B. Installing Drives...
Page 28
Windows rear door. B. Installing Drives...
Page 29
Windows Installing the PCI card Turn off your computer and unplug the AC power C. Installing the PCI card...
Page 30
Windows Remove the cover of your computer. Hold the PCIe the computer. C. Installing the PCI card...
Page 31
Windows connection to HDPro2. C. Installing the PCI card...
Page 32
Windows Installing RAID Shield Press the power switch to turn on the HDPro2. Install the CalDigit Driver. Insert the provided CD into the computer, or for the latest driver, please go to http://www.caldigit.com/support.asp. When installation is complete, restart the computer.
Page 33
Windows Launch RAID Shield Launch RAID Shield from: Programs / CalDigit / RAID Shield Client. Click "Scan Controller". Select your HDPro2. Type in the new array name. Click "Add". E. Launch RAID Shield...
Page 34
Windows Every time you "delete array" all data in the array E. Launch RAID Shield...
Page 36
Windows your array. Do not use the test mode option to set up your HDPro2. Test mode will not secure your data, and is only used for testing purposes. When array is completed restart your computer. chose "Manage." Computer Management / Storage / Disk When the format is complete restart the computer.
Page 37
Windows F. Shutting down the computer When you want to shut down your HDPro2, please Thank you! For choosing CalDigit. Please visit us at www.caldigit.com to register your product.