Advertisement
When the machine has successfully auto filled the steam boiler, turn on all groups and confirm water flow. Once
water is flowing from groups, turn them off and switch to position "2".
• Press and hold Sanremo logo (continuous) button on group 1 (left most group) until touchpad LED's
begin flash.
• Insert coffee prepped portafilter into group and select dose button for programming.
• When desired volumetric dose has been reached, press the same dose button to store volumetric
program.
• Repeat steps 2 & 3 for remaining dose buttons.
• Follow same procedure to program hot water tap dispensing volume.
• When finished, do not touch any of the group buttons for 30 seconds. Machine will then store program
and transfer to the remaining groups.
Machine will begin to heat
Volumetric Programming
Group Cleaning Mode
PRESS
HOLD
Advertisement
