Searching For A Location - DeLorme Earthmate GPS PN-60 User Manual

To view the current search method
Go to Find > MENU. The available options are preceded
by "Switch to..." and the device is set to the option that
is not showing. To change the search method, select the
method you want to use.

Searching for a Location

To search for a place, press Find at any time. The device
will begin searching using the most recent search criteria.
 You can change the search method.
 You can use additional search parameters, when
available, to narrow your search.
 "Searching >>>" displays as the device searches for
locations.
 At any time, press the arrow keypad to stop the
search process.
 If you stop the search, select Continue Search to
keep searching.
Show
The Show fi eld is the primary search category. You can
select the following Show options; below each option
is a list of information you can change to improve your
search results.
 All
State/Country/City/Name (Find by Name only)
 Recent Finds–Shows the ten most recent search
results.
 Draw Layers (appears only if you have draw layers
on the device)
Name (Find by Name only)
 GIS Layers (appears only if you have GIS layers
on the device)
Name (Find by Name only)
 Waypoints (from the current waypoint fi le)
Symbol
Name (Find by Name only)
 Geocaches (from the current geocache fi le)
Symbol
Name (Find by Name only)
 Points of Interest
Category
State/Country/City/Name (Find by Name only)
 Natural Features
Category
State/Country/City/Name (Find by Name only)
 DeLorme Atlas & Gazetteer Points
Category
State/Country/City/Name (Find by Name only)
 Addresses
State/Country/City/Building Number/Street Name
(Find by Name only)
The Find Page
45