Preset Operator File - Sony HDW-700A Maintenance Manual

5-3. Preset Operator File

5-3. Preset Operator File
The operator file items can be reset to the preset values. There are two ways of calling-calling from the
setting menus or reading at power ON. The items which can be stored on file are the same as Operator
File.
Calling from the Setting Menus (Step 3 of Fig. 5-2.)
Set the setting menus as follows.
[OPERATION] → [OPERATOR|FILE] → [PRESET]
Calling at POWER ON (Step 3 of Fig. 5-2.)
Set the WHITE BAL switch to "PRST", and while pushing the AUTO W/B BAL switch to the WHT
side, set the POWER switch to ON.
Storing the Preset Values (Step 4 of Fig. 5-2.)
The items of the preset values can be changed using the setting menus.
Set the setting menus as follows.
[FILE] → [OPERATOR|FILE] → [STORE|PRESET|FILE]
Then, current status can be stored in the camera as Preset Operator File.
Initializing the Preset Values (Step 5 of Fig. 5-2.)
Execute "CLEAR PRESET FILE" to initialize the changed preset items to the factory-set data.
5-3
HDW-700AE MMP1