Table of Contents
Advertisement
Available languages
Available languages
Parts Descriptions
Seam clamp
(The schematic above is for reference only, the actual product may vary slightly.)
Usage Tips:
It is recommended to use purified water or filtered water, which makes
the Garment Steamer more durable. Clean regularly to avoid damaging of clothing by the
impurities in the water after long use.
Warning:
The appliance shall be used in an environment with temperature of
10-40℃ and relative humidity of less than 90%.
Installation Instructions
1
Installation of support rod
Insert
Insert
Insert
Install each part in sequence
according to the figure.
Drain plug
Brush
Ironing board
Place the holder on the clothes rail
assembly (as shown), and press down
firmly to clip it into position.
Release the lock button,
insert the support rod into the
mainframe, and lock each spanner.
4
Glove
1
Advertisement
Table of Contents
