Table of Contents
Advertisement
2.1 General
The Elan appliance is an indirectly red air heater suitable for
installations where hot water supply is available.
The appliance is also suitable for district heating.
The electric power consumption is reduced strongly because a
direct current fan is used. This fan has a high electric e ciency
under all conditions of use.
It is possible to combine the Elan air heater with the heat reco-
very unit Renovent Excellent or Renovent Elan.
The air quantity is automatically adapted to the outlet tempera-
ture of the appliance. All this results in very stable room tempe-
rature, realising a perfect interior climate.
The Elan appliance is available in three versions:
Elan 10 2.0
Elan 16 2.0
Elan 25 2.1
Ex factory, the Elan 10 is always supplied in Down-
ow version; the Elan 16 and Elan 25 are always
supplied ex-factory in Up ow version! The installer
can easily convert the appliance into an Up ow ver-
sion (see § 5.3 or a own ow version (see § 5.4 .
2.2 Up ow and Down ow versions
The Elan 10 appliance is always supplied in a own ow ver-
sion and the Elan 16 and Elan 25 appliances are always sup-
plied in an Up ow version.
3
3
1
own ow version
2
1 = Hot air
2 = Return air ex factory
3 = Options for connection return air after
Elan 10 2.0 / Elan 16 2.0 / Elan 25 2.1
The appliance comes as standard with frost safety (see §4.2 .
This provision ensures that the heat exchanger cannot freeze.
The appliance comes ready to plug in. When it is placed, the
appliance must be connected to the system air ducts, the con-
densate discharge (applicable if a Renovent is mounted and
the mains power.
It is possible to connect a separate ventilation switch. This
switch makes it possible to set the appliance at 4 di erent mo-
des; see § 5.11.2.
The Elan appliance can also be set for outdoor air control (see
§ 4.3 .
The installer can easily convert the appliance into an Up ow
version (see § 5.3 or a own ow version (see § 5.4 .
2
Up ow version
614391-F
1
3
3
3
Advertisement
Table of Contents
