Table of Contents
Advertisement
5.11 Electric connections
The appliance comes with a 230 V mains plug.
On delivery, the 230 V mains cable is stored behind the bottom
5.11.1 Connecting the power plug
The appliance can be connected to an easily accessible,
earthed wall socket with the plug that is mounted to the ap-
pliance. The electric installation must comply with the require-
ments of your power company.
Various breakout tabs are provided for routing the power plug
out of the appliance.
Note:
Make sure that the mains cable is always free
from the exchanger when it is routed outside!
5.11.2 Ventilation switch
With an optional 4-way ventilation switch (connected to mo-
dular connector X2 , the user can set a number of operating
modes.
For electric connection of the 4-way ventilation switch, see
§11.2.
Position 4-way switch
1
2
3
Position 4-way switch
1
2
3
14
Operating mode standard step no. 9 to 0
Increased fan setting with cooling switched on high
-
System fan runs continuously at cooling air owrate + switch cooling output
Comfort setting regular
-
System fan controlled by system temperature sensor; at no demand
the system continuously runs at minimum air owrate
Ventilation setting o
-
System fan controlled by system temperature sensor; at no heat demand
the system fan is stopped
Increased fan setting high
-
System fan continuously runs at maximum set air owrate
Operating mode at outdoor air programme step no. 9 to 1
Increased fan setting with cooling switched on high
-
System fan runs continuously at cooling air owrate + switch cooling output
Comfort setting regular
-
System fan runs continuously at maximum air owrate
Ventilation setting o
-
System fan runs continuously at minimum air owrate
Increased fan setting high
-
System fan runs continuously at cooling air owrate
Elan 10 2.0 / Elan 16 2.0 / Elan 25 2.1
panel ( own ow version ; see §3.4 or behind the upper panel
(Up ow version .
Warning
The fan and control board carry a high voltage.
Always take the voltage from the appliance by
pulling the power plug when working on the ap-
pliance.
The position of the multiple switch is indicated on the appliance
display (behind the ventilation symbol .
Note: The multiple switch functions di er when the appliance
is set to the outdoor air programme!
stand-by
stand-by
614391-F
Advertisement
Table of Contents
