Table of Contents
Advertisement
5.7 Conversion from right-handed to left-handed appliance
As standard, an Elan has the lter on the right-hand side of the
appliance. If necessary, it can be moved to the left-hand side.
Always take the voltage from the appliance by pulling
the power plug when working on the appliance.
1
Open both lter doors.
Unscrew two long countersunk screws (Torx T20 .
Take lter mesh from the appliance.
2 x
2 Slide the lter from the appliance.
3
Unscrew the lter rail (4x Torx T20
Take the lter rail from the appliance.
4 x
12
Elan 10 2.0 / Elan 16 2.0 / Elan 25 2.1
4
Unscrew the panel on the left-hand side (2x Torx T20
Take out the panel.
5 Place the lter rail that was removed from the right-hand
side on the now free opening and x it with 4 screws.
Note: Filter rail is mounted at a pitch to the rear!
A
6
Place the lter in the lter rail.
Mount the lter mesh with 2 long Torx screws.
7
Mount the panel taken from the right-hand side.
Fix it with 2 long Torx screws.
8 Now the Elan appliance has the lter connection on the left-
hand side instead of on the standard right-hand side.
614391-F
A
2 x
B
B
B
A
2 x
2 x
Advertisement
Table of Contents
