Table of Contents
Advertisement
6.1 General e planation control panel
The display shows the appliance's current operating mode.
Four control keys can be used to call up and modify settings in
the control unit programme.
When the mains power to the Elan appliance is switched on, all
display symbols will appear during 2 seconds; at the same time
the backlight is switched on for 60 seconds.
When one of the control keys is operated, the display will light
up during 30 seconds.
When no keys are operated or when no deviating situation has
developed (such as a blocking fault the display will show the
operating mode (see § 6.2 .
Key
Function key
Menu
Activate the settings menu; to the next step in the submenu; con rm value change
-
Scroll; modify value
+
Scroll; modify value
R
One step back in menu; cancel value modi cation; lter reset (press for 5 seconds , delete fault history
A
B
Elan 10 2.0 / Elan 16 2.0 / Elan 25 2.1
After operating the key 'Menu', the keys "+" or "-" can be used
to select from three di erent menus, including:
Settings menu (SET ; see § 6.3
Readout menu (REA , see § 6.4
Service menu (SERV , see § 6.5
Press the R key to leave any menu and return to operating
mode.
Brie y press the R key (for shorter than 5 seconds to switch
on the display backlight without changing anything in the menu.
614391-F
15
Advertisement
Table of Contents
