Table of Contents
Advertisement
2. Reposition the compressor and the relevant belt follow-
ing this procedure:
- Put the compressor back on the support and with the
related pipe support. Secure with the bolts
– To mount the polyv belt, use the specific tool
380200011.
(1). Compressor clutch actuator drive bracket.
(2). polyv belt pulley outer edge.
(3). Tool recess. Used to drive the tool. This recess
houses the bracket (1).
(4). Tail. Used to drive the polyv belt in the pulley seat.
(5). Hitching. Thanks to this recess, where the outer
edge (2) is housed, the tool remains hitched to the com-
pressor.
3. Remove the three bolts (1) and the related dust cover
for the compressor clutch.
4. Ensure that the polyv belt (2) is perfectly housed on the
fan pulley.
Engine - Engine and crankcase
47803847 15/12/2014
10.1 [10.001] / 34
1
WLAPL4S10C101C
2
WLAPL4S10C142A
Hide quick links:
Advertisement
Table of Contents
