New Holland T4.75 Service Manual page 43

6. Then detach the lower pipe (3) on the condenser (1).
Free the pipe from any straps or clamps. Disconnect
the sensor (2) and take it to the cab.
7. Raise the rear of the tractor with a hydraulic jack. Place
a mechanical jack stand under the reduction gear case.
Use a pneumatic gun to remove the retaining nuts of
the left-hand rear wheel. Then remove the wheel.
8. Unscrew the front, central, and rear retaining bolts on
the guard of the front axle control shaft. Then remove
the guard (1).
9. Remove the circlip (2) and move the front sleeve (1) in
the direction indicated by the arrow until it is released
from the groove on the front axle.
Engine - Engine and crankcase
47803847 15/12/2014
10.1 [10.001] / 14
3
WLAPL4S10C107A
4
WLAPL4S10C110A
5
WLAPL4S10C112AA
6
WLAPL4S10C113AA