New Holland T4.75 Service Manual page 65

11. Reposition the movable tool for dismantling tractors
(2) under the engine. Place a wooden block (1) in the
point of contact between the tool and the engine.
12. With the aid of the hoist, place the engine (1) on the
tool (2). Remove the lifting eyebolts previously fitted
on the rear of the engine.
13. Remove the fixed jack stand (3) previously positioned
under the support of the groove (1) of the drive of the
front axle and the wooden plug (2).
14. Remove the fixed jack stand (1) previously fitted under
the ballast support and the wooden wedges (2) locking
the front wheels.
15. Remove the old sealing paste from the two surfaces
between the engine and clutch case.
Engine - Engine and crankcase
47803847 15/12/2014
10.1 [10.001] / 36
7
WLAPL4S10C140A
8
WLAPL4S10C131AA
9
WLAPL4S10C133A
10
WLAPL4S10C132AA