New Holland T4.75 Service Manual page 64

5. Move the belt (2) near to the compressor pulley. Keep-
ing the tool 380200011 under the belt, hook the tool
onto the compressor clutch at the innermost part in or-
der to slightly force the belt.
6. With your left hand on the fan and right hand on the
tool, move both clockwise in order to take the belt onto
the compressor pulley.
Put the dust cup back onto the compressor clutch.
Tighten the three screws, ensuring that you spread
a film of thread lock on the ends so that they do not
come loose.
7. Position the alternator (1) and the elastic belt (3).
Tighten the belt tensioner (2).
8. Reposition the viscous joint (1) and the cooling fan (2).
9. Insert the three hooks of the chain in the eyelets on the
engine. Using a hoist, lift the assembly off the platform
support.
10. Position the engine (2) on the front axle (3), trying to
avoid incorrect operations with the hoist so as not to
let the engine fan damage the fins of the radiator (1).
Then join the two assemblies together with the four
retaining bolts and the necessary adjuster spacers for
the cylinder block/sump support.
Engine - Engine and crankcase
47803847 15/12/2014
10.1 [10.001] / 35
3
WLAPL4S10C143A
4
WLAPL4S10C145A
5
WLAPL4S10C144A
6
WLAPL4S10C138A