Advertisement
Quick Links
Exo Chair Cactus Replacement
PARTS INCLUDED:
Part number
Description
950-289
Exo Chair Cactus 2.0 Assembly
GEN9284
1/8" Allen Hex Key
GEN9282
5/32" Allen Hex Key
FOR COMBO CHAIR, SEE PAGE 3. FOR WUNDA CHAIR,
SEE PAGE 6
REMOVAL OF EXO CHAIR CACTUS BRACKET:
1. Remove the old cactus from your chair
2. Use the provided smaller 1/8" Allen hex key to remove the (4)
button head screws and washers that are securing the chair
pad to the wooden frame. Keep these screws and washers,
they will be reused. See Figure A.
Figure A
Qty
1
1
1
3. Use the provided bigger 5/32" Allen key to remove the (2) flat
head screws on the top of the cactus to the wooden frame,
and the (2) button head screws that secure the bottom of the
cactus to the rear wood frame. Keep these screws, they will be
reused. See Figure B.
Figure B
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | info@pilates.com
400-430 | 07.05.18
Advertisement
Related Manuals for Balanced Body Exo Chair
Summary of Contents for Balanced Body Exo Chair
- Page 1 5/32” Allen Hex Key FOR COMBO CHAIR, SEE PAGE 3. FOR WUNDA CHAIR, SEE PAGE 6 REMOVAL OF EXO CHAIR CACTUS BRACKET: 1. Remove the old cactus from your chair 3. Use the provided bigger 5/32" Allen key to remove the (2) flat head screws on the top of the cactus to the wooden frame, 2.
- Page 2 INSTALL EXO CHAIR CACTUS 2.0 BRACKET: USING YOUR NEW EXO CHAIR CACTUS 2.0 BRACKET: 4. Remove the old cactus from your chair Pull the spring hook by the attached nylon web up over the desired height onto the horn. Continue to slide the hook back 5.
- Page 3 Combo Chair Cactus Replacement PARTS INCLUDED: Part number Description 950-288 Combo Chair Cactus 2.0 Assembly GEN9284 1/8" Allen Hex Key GEN9034 Phillips Pan Head Screw #10 x 1" TOOLS REQUIRED (NOT INCLUDED): » Phillips Head Screwdriver #2 drive (recommend a power drill with #2 bit) REMOVAL OF COMBO CHAIR CACTUS BRACKET: 1.
- Page 4 3. Use the provided 1/8" Allen hex key to remove the (4) button INSTALL COMBO CHAIR CACTUS 2.0 BRACKET: head screws that are securing the cactus to the back and 6. Place the new Cactus 2.0 Bracket in the same orientation as bottom of the wooden frame.
- Page 5 USING YOUR NEW COMBO CHAIR CACTUS 2.0 BRACKET: Pull the spring hook by the attached nylon web up over the desired height onto the horn. Continue to slide the hook back down the horn so that the ring will fall into the groove in the plastic backer.
- Page 6 Wunda Chair Cactus Replacement PARTS INCLUDED: Part number Description 950-290 Wunda Chair Cactus 2.0 L/R Assembly GEN9282 5/32" Allen Hex Key 5/32" Allen Hex Key TOOLS REQUIRED (NOT INCLUDED): » Phillips Head Screw driver #2 drive or Power drill with #2 bit REMOVAL OF WUNDA CHAIR CACTUS BRACKET: 1.
- Page 7 3. Use the provided 5/32" Allen hex key to remove the (2) button INSTALL WUNDA CHAIR CACTUS 2.0 BRACKET: head screws that are securing the cactus to the back of the wooden frame. Keep these screws, they will be reused. 6.
- Page 8 DO NOT use your chair if the spring ring is not in the designed groove of the plastic backers. Figure M Question? Contact Balanced Body Technical Support at 1-800-745-2837 (US and Canada), +1-916-388-2838 (all other countries) Contact Us 1-800-PILATES | +1-916-388-2838 pilates.com | info@pilates.com...