15. Initialization of LG Network Storage
7. Select 'LGNAS-Enclosure' and press 'Install NAS System' button.
8. Select a firmware file(zipped) for initialization in the zip file on the file selec-
tion screen.
9. After a file is selected, initialization will start. When initialization completes, it will be
automatically rebooted. After rebooting, volume configuration will start automatically.
(HDD LED will flicker)
※
Refer to the table on the right for time
it takes for hard disk initialization and
volume configuration.
※
This is for Hitachi HDD, 7200 RPN. The
duration can differ, depending on the
hard disk manufacturer.
10. Click 'Search' button and modify LG Network Storage's IP information in ac-
cordance with the network before use.
A total ca-
pacity of HDD
1TB HDD
2TB HDD
99
Installation time for
initialization
Approximately 45
minutes
Approximately 80
minutes