. File sharing service
10
-3
6. Connection on a Mac
※ The following is applicable for 'globalSAN initiator 3' .
※ Audio CD is not supported in 'globalSAN initiator 3' .
Activate iSCSI initiator.
Go to System Preferences -> globalSAN iSCSI
Find the iSCSI target. If the IP address is 192.168.xxx.xxx, see below.
Go to globalSAN iSCSI -> Portals and press "+" and enter 192.16 8.xxx.xxx and
press "OK".
※ If a mandatory certification (CHAP) procedure has been set up in
the web setting, enter the required information by pressing the Advanced button in the above
window.
iSCSI
87