Table of Contents
Advertisement
. File sharing service
10
-3
Log in.
Go to the Targets tab on the cop of the iSCSI Initiator program. If all of the above proce-
dures have been followed properly, the iSCSI Initiator will find and list the information for
the target (LG-NAS). Select the relevant target name and press the "Connect" and click
"OK" from the pop-up window.
Check that the target has been connected as follows.
Target can be checked by going to Device administrator -> DVD/CD-ROM drive.
Log out when done.
Go to the Targets tab on the top of the iSCSI Initiator program. Then click on the
'Properties' button on the bottom.
iSCSI
84
Advertisement
Table of Contents
