LG S1T1 User Manual page 86

. File sharing service
10
-3
5. Connection for CHAP certification
Open the open-iscsi set-up file "/etc/iscsi/iscsid.conf"and set up
the CHAP certification. Follow the below instructions. (The CHAP certificate pass-
word must match the password set up for the iSCSI service on the LG Network
Storage webpage.)
node.session.auth.authmethod = CHAP
node.session.auth.username = outAdmin
node.session.auth.password = password set up (Initiator Secret)
discovery.sendtargets.auth.authmethod = CHAP
discovery.sendtargets.auth.username = inAdmin
discovery.sendtargets.auth.password = password set up (Target Secret)
Activate open-iscsi.
$ /etc/init.d/open-iscsi start
If the open-iscsi was already activated, restart.
$ /etc/init.d/open-iscsi restart
The rest of the procedures are the same as for [Connection to a L
inux PC].
☞ Websites
http://www.cyberciti.biz/faq/howto-setup-debian-ubuntu-linux-iscsi-initiator/print/
http://manpages.ubuntu.com/manpages/hardy/man8/iscsiadm.8.html
http://wiki.debian.org/iSCSI/open-iscsi
iSCSI
86