Transportation Instructions; Installation Instructions - Scandomestic SB 101 W User Manual

Hide thumbs Also See for SB 101 W:
Table of Contents

Advertisement

Available languages

Available languages

SAFETY (WARNING / IMPORTANT)
Read you Manual carefully as it contains instructions that will
ensure safe installation, use and Maintenance.
DO NOT connect the appliance to the electricity supply until all
packing and transit protectors have been removed.
Leave to stand for at least 4 hours before switching on to allow
compressor oil to settle if transported horizontally.
Before disposing your old appliance, Remember to break or
remove the lock as a safety measure to protect children who
might lock themselves inside the appliance when playing.
This freezer must only be used by adults and exclusively for
storing foodstuffs in compliance with the instruction provided
in manual.
DO NOT dispose of the appliance on a fire. At our company, the
care and protection of our environment is an ongoing com-
mitment. This appliance is particularly environmentally friend-
ly. Take care not to damage, the cooling circuit / pipes of the
appliance in transportation and in use.
In case of damage do not expose the appliance to fire, poten-
tial ignition source and immediately ventilate the room where
the appliance is situated.
To obtain the best possible performance and trouble free oper-
ation from your appliance it is very important to carefully read
these instructions.
On delivery, check to make sure that the product is not dam-
aged and that all the parts and accessories are in perfect con-
dition.
We do not recommend the use of extension leads and multi-
way adapters.
Failure to observe these instructions may invalidate your right
to free service during the guarantee period.
This refrigerating appliance is not intended to be used as a
built-in appliance.
Note!: When operating in an environment other than the
specified climate type (i.e., beyond the rated ambient
temperature range), the appliance may not be able to
maintain the desirable compartment temperatures.
Instructions shall contain the substance of the following:
Do not use extension cords or ungrounded (two prong)
adapt-ers.
If the SUPPLY CORD is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in
order to avoid a hazard.
Warning the installer that the refrigerator must be disconnect-
ed from the source of electrical supply before attempting lamp
changing.
A child entrapment statement is included in the operating
in-structions of the user manual. The warning statement
includes the following wording:
"DANGER: Risk of child entrapment. Before you throw away
your old refrigerator or freezer:
Take off doors.
Leave the shelves in place so that children may not easily
climb inside."
WARNING! Do not use mechanical devices or other means
to accelerate the defrosting process, other than those
recom-mended by the manufacturer.
WARNING! Do not damage the refrigerant circuit.
WARNING! Do not use electrical appliances inside the
food storage compartments of the appliance, unless they are
of the type recommended by the manufacturer.
We suggest you keep these instructions in a safe place for easy
reference.
Never touch the interior of the freezer chamber or frozen
foods in the compartment with wet hands as this could result
in frost bite. KEEP THE KEY OUT OF CHILDREN AND NOT
IN THE VICNITY OF THE FREEZER.

TRANSPORTATION INSTRUCTIONS

The appliance should be transported in a vertical upright posi-
tion. The packing as supplied must be intact during transporta-
tion.
If during the course of transport the product has been trans-
ported horizontally, it must only be laid on its left hand side
(facing the door front) and it must not be operated for at least
4 hours to allow the system to settle after the appliance is
brought back to upright position.
Failure to comply with the above instructions could result in
damage occurring to the appliance. The manufacturer will not
be held responsible if these instructions are disregarded.
The appliance must be protected against rain, moisture and
other atmospheric influences.
IMPORTANT: DO NOT touch internal cooling elements, especial-
ly if your hands are wet, as you could burn or injury yourself.
IMPORTANT: Before doing any cleaning, disconnect the appli-
ance from electricity.
IMPORTANT: This appliance is not designed for stacking with
any other appliance. Do not attempt to sit or stand on top of
your appliance, as it is not designed for such use. You could in-
jure yourself or damage the appliance.
IMPORTANT: Make sure that mains cable is not caught under
the appliance during and after carrying / moving the appli-
ance, to avoid the mains cable becoming cut or damaged.
When positioning your appliance take care not to damage your
flooring, pipes, wall coverings etc.
Do not move the appliance by pulling by the lid or handle.
Do not allow children to play with the appliance or tamper
with the controls.
Our company declines to accept any liability should above in-
structions not be followed.

INSTALLATION INSTRUCTIONS

To ensure that the appliance operates properly and to reduce
energy consumption, it is important that the appliance is in-
stalled correctly.
Avoid positioning the appliance near cookers, radiators or in di-
rect sunlight, as this will cause the compressor to run for long
periods. If installed next to a source of heat or refrigerator,
maintain the following minimum side clearances:
From Cookers, 4" (100 mm)
From Radiators, 12" (300 mm)
From Fridges, 4" (100 mm)
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sb 201 w

Table of Contents