Watchguard AP432 Hardware Manual page 11

WatchGuard AP432 Hardware Guide
LED Color Status
Device is booting.
Solid Red
A permanent solid red LED after booting is very rarely a hardware issue. It may take
several minutes before the access point successfully connects to WatchGuard
Cloud.
Please review all the troubleshooting tips above before you contact WatchGuard
technical support. In most cases a network issue, blocked port, licensing, or
WatchGuard Cloud account issue will result in the access point not connecting or
appearing in your WatchGuard Cloud account.
Device cannot connect to WatchGuard Cloud. This can occur for several reasons, for
Flashing Red
example:
n
n
Solid Blue Device is online and connected to WatchGuard Cloud
Flashing Blue Flash LED action from WatchGuard Cloud
11
Device did not receive an IP address from DHCP
Device cannot connect to *.watchguard.com or *.watchguard.io because of a
network issue or blocked port
WatchGuard Technologies, Inc.