Concord Camera Eye-Q 3340z User Manual page 12

GETTING STARTED
Setting the Date
ADJUST DATE
01 Ú 01 Ú 2002
RETURN SET
OK
1. Press the joystick
• The selection will blink when it is highlighted.
2. Press the joystick
desired setting.
3. Press to set the date.
OK
Note:
• If the battery is removed or dead for more than 4 minutes, the date will return to its default
setting. When you power on the camera again, the "Set Date/Time" message will flash on
LCD. You can either reset date/time by manually changing it in the Setup menu (p.37), or
skip the date & time setting by pressing the shutter button once.
Setting the Time
ADJUST TIME
01 :0 1 AM
RETURN SET
OK
The time is displayed in hour, minute format.
1. Press the joystick
• The selection will blink when it is highlighted.
2. Press the joystick
desired setting.
3. Press to select.
OK
Note:
The time can be displayed in a 12-hour or 24-hour format. Please go to p.37 to change this
setting.
If the battery is removed or dead for more than 4 minutes, the time will return to its default
setting. When you power on the camera again, the "Set Date/Time" message will flash on
LCD. You can either reset date/time by manually changing it in the Setup menu (page 37), or
skip the date & time setting by pressing the shutter button once.
ADJUST DATE
01 Ú 01
RETURN
to highlight the month, day or year.
to change the number in the blinking position until you reach the
ADJUST TIME
01: 01
RETURN
to highlight the hour (HH), minutes (MM) or AM/PM.
to change the selection in the blinking position until you reach the
11
Ú 2002
SET
OK
AM
SET
OK
ADJUST DATE
01 Ú 02 Ú 2002
RETURN SET
OK
ADJUST TIME
01: 02 A M
RETURN SET
OK