Real-Time Spectrum Analyzer Software Compatibility; Tekconnect Probe Compatibility; Table 1: Compatible Probes - Tektronix RTPA2A Instruction Manual

Getting Started

Real-Time Spectrum Analyzer Software Compatibility

TekConnect Probe Compatibility

2
If your product is running Windows 98 application software, you need to
upgrade to Windows XP to use the TekConnect probe adapter. To upgrade your
product, contact the Tektronix support center (for contact information, see the
contact page at the front of this manual).
If your product is a RSA2200A, RSA3300A, RSA3408A, or WCA200A Series
instrument, it requires Main System software shipped after August 2005 to be
compatible with the TekConnect probe adapter. Contact Tektronix technical
support if you need to verify that your Main System software supports the
RTPA2A TekConnect probe adapter.
For questions about an instrument not listed here, contact the Tektronix support
center.
The TekConnect probe adapter supports only TekConnect probes. Refer to
Table 1 for a list of compatible probes.

Table 1: Compatible probes

Probe Attenuation
P7225 10x
P7240 5x
P7260 5x, 25x
P7330 5x
P7313 5x, 25x
P7350 6.25x
P7350SMA 6.25x
P7380 5x, 25x
P7380SMA 2.5x 12.5x
There is no support for TekProbe Level 2 legacy probes that use the
TCA-1MEG, TCA-BNC, and TCA75 adapters.
Description
Active Probe
Active Probe
Active Probe
Differential Probe
Differential Probe
Differential Probe
Differential Probe
Differential Probe
Differential Probe
RTPA2A Instruction Manual