Dekolink DEKO2408 Product Manual page 49

D W L
EKOLINK IRELESS TD
7.5.4.1 Temperature Shutdown
Most probable cause: Unit temperature unit is too high. Mini-Repeater
ceases operation.
Corrective action: Check the Repeater case for external causes (sun, hot
environment). Open case for cooling.
7.5.4.2 Temperature Warning
Most probable cause: Unit temperature unit is becomes high. .
Corrective action: Check the Repeater case for external causes (sun, hot
environment). Open case for cooling.
7.5.4.3 System Mute
Most probable cause: Mini-Repeater amplification is muted
(automatically). .
Corrective action: Check the LEDs in the Mini-Repeater. See paragraph
7.4.
7.5.4.4 User Mute
Most probable cause: Mini-Repeater amplification is muted (manually). .
Corrective action: This is the result of an operator action. Check RF
Transmission box in Link area in the Controls and Parameters pane. The
box should be empty. Click on it to change the LED status.
Check first the reason for the suppression of the function.
Check that the Mini-Repeater is not checked out in the
Check the LEDs in the Mini-Repeater. See paragraph 7.4.
7.5.4.5 Panel Switch Mask
Most probable cause: Mini-Repeater front panel LEDs are disabled.
Corrective action: This is not a malfunction. Check the reason for the
action.
Pub. 308-2005 Rev. 2.00S
. M R
INI EPEATER
CAUTION
Do not cool with water
CAUTION
Do not cool with water
CAUTION
Proprietary Data
D 2408-09
EKO
field.
P M
RODUCT ANUAL
Page 41