Table of Contents
Advertisement
SAFETY FEATURES
Seat Belts
To properly fasten your safety belts:
1. Insert the belt tongue plate
2. Position the lap portion of the belt across your lap as LOW
ON THE HIPS as possible. Adjust the belt to a SNUG FIT by
pulling up on the shoulder portion
Seat Belt Retractor Locks
Retractor locks allow lap/shoulder safety belts to remain
unlocked during normal vehicle operation for freedom of
movement and increased comfort.
During a STRONG STOP, SUDDEN TURN OR CERTAIN
COLLISIONS, seat belt retractors will automatically lock
the belts to help reduce the risk of injury.
Pre-Safe Seat Belt (PSB)*
The Pre-Safe Seat Belt (PSB) will activate and pull the seat
belt into tighter contact against the occupant's body if a
collision is detected or during certain driving maneuvers.
The PSB system operates as below:
The seat belt may tighten when:
§
- The vehicle senses a collision
- An emergency braking situation occurs
- There's a loss of vehicle control
48
A
A
into the buckle until it clicks
B
B
Quick Tip
The seat belt warning chime operates for the
driver's seat only.
For more detailed information regarding your vehicle's
safety belts, please refer to your Owner's Manual
and the separate brochure titled "Understanding Your
Safety Belt & Supplemental Restraint System."
REMINDERS:
The Pre-Safe Seat Belt warning light will illuminate
on LCD screen if there is a problem with the system.
Have the system checked if:
- The warning light does not turn on briefly when
you turn the ENGINE START/STOP button to the
ON position
- The warning light stays on after illumination for
approximately 3 seconds
- The warning light comes on while the vehicle is
in motion
*IF EQUIPPED
Advertisement
Table of Contents
