Table of Contents
Advertisement
SEATING
Driver Position Memory System
The integrated system stores into memory the position of
the driver's seat, outside rearview mirrors, Head-Up Display
(HUD)*, and steering wheel positions. To store positions into
memory, first place the gear shift into P (Park) while the
ENGINE START/STOP button is in the ON position. Then:
1. Adjust the driver's seat, outside rearview mirrors, Head-
Up Display (HUD)* settings and steering wheel positions
2. Press the SET button
beep once
3. Press one of the memory buttons 1 or 2
seconds. The system will beep twice when memory has
been stored
Power Reclining Rear Seats*
The rear seats can be adjusted by using the control switches
located on the door.
Seatback & Seat Slide Adjustment:
§
Move the button
C
seatback position
§
Move the button
D
seat position
Easy Access (AUTO) Button – When opening the rear door, the
rear seats will automatically move rearward to provide
easier access for passengers. Press the AUTO button
the door panel to turn the system ON (LED is lit) and OFF (LED
not lit).
36
A
on the control panel. System will
B
forward/backward to adjust the
forward/backward to adjust the
within 5
REMINDERS:
- Keep hands and other objects away from seat
- Do not adjust the seat while wearing seat belts
- Do not operate the rear power seat while the child
- Do not operate two or more power seat control
E
on
A
(Buttons located on driver door panel)
E
D
(Controls located on door panel)
mechanisms while the seat is in motion
seat is installed
switches at the same time. Doing so may result
in power seat motor or electrical component
malfunction
B
C
*IF EQUIPPED
Advertisement
Table of Contents
