Table of Contents
Advertisement
STEERING WHEEL CONTROLS
Headlights & High Beams
AUTO Light* – When the light switch is in the AUTO
Light position, the tail lights and headlights will turn
ON/OFF automatically depending on the amount of light
outside the vehicle.
AFLS (Adaptive Front Lighting System) – AFLS helps improve
visibility during nighttime driving by aiming the low-beam
headlights in the direction the vehicle is moving. AFLS controls
the aiming direction based on steering angle and speed.
When the light switch is in the AUTO light position, AFLS
will activate.
REMINDER: When the AFLS indicator illuminates on the instrument cluster, the
AFLS is not working properly. See authorized Kia dealer for service.
Daytime Running Lights (DRL) – DRL makes it easier for
others to see the front of your vehicle during the day. The lights
will be on automatically unless one of the following occurs:
Headlights are on
§
Parking brake is applied
§
Fog lights are on
§
Turn Signals & Fog Lights
To operate:
Move lever up/down for right/left turn signal
§
Slightly move lever up/down to activate one-touch lane
§
change signal
Press toggle switch
§
16
A
Switch is in the DRL
§
OFF position
Engine is turned off
§
A
up to turn fog lights ON/OFF
Headlight / High Beam Lever Operation
Rotate lever switch to change the
§
headlight function:
Headlight position
Parking light position
Auto Light* / AFLS position
AUTO*
OFF or DRL OFF position
DRL/OFF
Press lever away from you to turn
§
high beam headlights ON
Pull lever to flash headlights/
§
high beams
REMINDERS:
- Headlights must be ON for fog light operation
- One-touch lane change signal is activated by
moving the turn signal lever slightly for less than 1
second and then releasing. The lane change signal
will blink 3 times
- To change how many times the lane change signal
blinks (3/5/7), go to User Settings in the LCD
instrument cluster modes
For more information on the User Settings Mode,
please refer to your Owner's Manual.
*IF EQUIPPED
Advertisement
Table of Contents
