Table of Contents
Advertisement
DRIVER'S PANEL
(Buttons located on driver's panel, left of the steering wheel)
Instrument Panel Dimmer
With parking lights/headlights ON, press
panel illumination.
REMINDER: The Instrument Panel Dimmer does not adjust brightness on the navigation system screen.
Use navigation setup to adjust brightness on the navigation system.
Electronic Stability Control (ESC) / Traction Control System (TCS)
Electronic Stability Control (ESC) is designed to help stabilize the vehicle during cornering maneuvers.
Traction Control System (TCS) helps improve traction while accelerating on slippery surfaces. It is a good
idea to keep both ESC and TCS turned on for daily driving whenever possible.
Press the ESC button
To turn Electronic Stability Control and Traction Control System OFF, press and hold the ESC button for more
than 3 seconds. Press again to turn ON.
REMINDERS:
- ESC is active by default at vehicle start-up. When ignition is cycled, ESC will turn ON again
- The ESC indicator light in the instrument cluster will be lit momentarily whenever ESC is active
For more information on Electronic Stability Control (ESC) and its specific features and operations, please refer to your Owner's Manual.
Hill-start Assist Control (HAC)
Hill-start Assist Control (HAC) helps prevent the vehicle from
rolling backwards when accelerating from a stop while on a
steep incline.
HAC automatically activates whether ESC is OFF or ON but
does NOT activate when ESC has malfunctioned.
REMINDER: HAC does not operate when the gear shift is in P (Park) or N (Neutral) position.
8
A
A
(+) or (-) to adjust the brightness of the instrument
B
to turn Electronic Stability Control and Traction Control System OFF/ON.
B
Quick Tip
When HAC is active (e.g., during initial acceleration
from a stop on an incline), you may notice that the
brakes will momentarily remain engaged after you
depress the accelerator.
*IF EQUIPPED
Advertisement
Table of Contents
