K900 2019 For Models K900 2020 Update Media 1 USB Update Time ~ 60 minutes Map Version NAM.12.47.44.XXX (Version 13.5) after Update STEP 1 Start the vehicle engine by pressing the ENGINE START BUTTON or using the key. (Engine must stay running during the entire update to keep the battery charged.
Page 3
STEP 3 Scroll down to and choose “System Info”. STEP 4 Under “Software Information”, check the current map version. If the first six numbers are less than the current version, a map update is required. Current Map Version: NAM.12.47.44.XXX 12:00pm System InfoU pdated: 03.15.2019 S/W VER.
Page 4
STEP 5 Insert the map update USB. A pop up will appear. Press “Now” to start the update. Insert USB Media 12:00pm System Info Updated: 03.15.2019 S/W VER. Software Information FE.USA.P5.001.002.190129 Storage FIRMWARE VER. Start system update? FE.181211.05.03 Web Manual NAVI APP VER.
Page 5
STEP 6 The system will go through several stages including validating the files, updating, and rebooting the system. If asked to reboot, press Yes. The entire process takes approximately 60 minutes. Note: No action is required during this process by the owner.
Page 6
STEP 6 If prompted to reboot system press “Yes”. Otherwise, system will automatically restart after 30 seconds. (Continued) 12:00pm System Info Updated: 03.15.2019 Software Information Validating Update File(s)... Storage Please do not remove USB Web Manual device containing the update(s). Reset Cancel...
Page 7
STEP 7 After the last reboot, the system will display the home screen. Press Confirm and check the map has been updated to the latest Map Version. Press “Setup” on the control panel, scroll down to “System Info” and check the Map Version.