Advanced Smart Cruise Control (Ascc) - Kia K 900 2017 Features & Functions Manual

STEERING WHEEL CONTROLS
C
(Buttons located on right side of the steering wheel)

Advanced Smart Cruise Control (ASCC)*

The Advanced Smart Cruise Control (ASCC)* system allows
you to set the vehicle to maintain a speed so long as it is not
limited by traffic. When traffic is encountered, the vehicle will
be slowed to maintain a set distance behind traffic without
depressing the accelerator or brake pedal.
To set/adjust the ASCC speed:
Press the CRUISE button up
§
CRUISE indicator will illuminate on the instrument cluster
Accelerate/decelerate to the desired speed
§
§ Press the RES+ / SET- button up/down
adjust speed
To set the vehicle-to-vehicle distance:
Press the ASCC button
§
Each time you press
§
will change, indicated by the number of bars that appear
on the display D
To turn the ASCC system OFF:
Press the CRUISE button up. The CRUISE indicator on the
§
instrument cluster will turn off and the LCD screen ASCC
image will show cancelled
18
A
E
to turn system ON. The
A
B to set or
on the steering wheel.
C
C the vehicle-to-vehicle distance
B
CRUISE
ADVANCED SMART
CRUISE CONTROL
(ASCC) VIDEO
To view a video on
your mobile device,
snap this QR Code or
visit the listed website.
Refer to page 2 for
more information.
Quick Tips
The speed setting for the ASCC can be adjusted
under the following conditions:
- With no vehicle in front, you must be travelling at
a minimum speed of 20 mph
- When following a vehicle, there is no minimum
speed requirement
When following a vehicle, the system will
automatically adjust your cruise speed based on
the vehicle in front. It will even bring the vehicle to
a complete stop if necessary. If the vehicle remains
at a standstill for more than 3 seconds, you must
depress the accelerator pedal or press the
RES+/SET- button up/down to start the vehicle.
To change the cruise control mode from ASCC to
standard cruise control, press and hold button
Repeat to switch back to ASCC mode. (The ASCC
system must not be activated to change modes).
REMINDERS:
- CRUISE indicator must be ON in order to
operate ASCC
- The cruise control system will not activate until
the brake pedal has been depressed at least once
after ignition is ON or engine starting
65mph
D
(Display on
instrument cluster)
www.KuTechVideos.com/kh13/2017
.
C
*IF EQUIPPED