Advertisement
Available languages
Available languages
Do not connect to mains-operated equipment such as battery chargers.
Warning!
-
Do not connect to mains-operated (line-operated) equipment.
-
Switch the energizer off before installation or performing any work on the fence.
-
Read all the safety considerations carefully. See
-
Check your installation to ensure that it complies with all local safety regulations.
Note:
-
This product has been designed for use with electric animal fences.
-
Keep this manual in a handy location.
Batteries
Recommended batteries
Use two D size, 1.5 V dry cell alkaline batteries. Batteries will last 35 days with the
energizer operating continuously.
Notes:
-
Do not mix battery brands, types or ages and always replace complete set with new
batteries, all of the same brand and type.
-
Nickel Cadmium (NiCd) or Nickel Metal Hydride (NiMH) rechargeable batteries are
not recommended, as the energizer's pulse speed will be slower and operation
between recharges may be as short as a few days. If rechargeable batteries are
used then they must be removed from the energizer before being recharged.
Installing the batteries
Warning!
Switch off the energizer before installing batteries.
1
Release the two catches on the side of the battery compartment.
2
Install two 1.5 V dry cell batteries, making sure the polarity is correct (positive to
+, negative to -) as indicated on the battery compartment.
Safety Considerations
.
3
Advertisement
