Advertisement
Quick Links
Advertisement
Related Manuals for J-Tech Digital JTD-178
Summary of Contents for J-Tech Digital JTD-178
- Page 1 User manual 1X2 SDI Splitter JTD-178 | JTDSDI0102...
- Page 2 Thank you for purchasing the J-Tech Digital JTDSDI0102. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. I. Introduction The JTDSDI0102 splitter distributes 1 SDI, HD-SDI or 3G-SDI video source to 2 SDI/HD-SDI/3G-SDI displays simultaneously.
- Page 3 II. Features 1 SDI input signal split to 2 SDI sink devices. Supports SD-SDI (270Mb/s) | HD-SDI(1.485Gb/s) | 3G-SDI(2.97Gb/s) video formats. Built-in cable equalization, clock recovery and drive. Supports resolutions up to 1920x1080@60Hz. Supports signal input and output distances of up to 984FT for SD signals, 656FT for HD signals and 328FT for 3G signals.
- Page 4 IV. Specifications Frequency Bandwidth 3Gbps SDI Splitter Input Ports 1 x BNC Female input port SDI Splitter Output Ports 2 x BNC Female output ports Power Supply DC 5V 1A ESD Protection Human Body Model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) Dimensions (W x D x H) 2.75in x 5.70in x 0.98in Weight...
- Page 5 V. Operation Controls and Functions Front Panel ON/OFF: Power on/off switch. POWER LED: This red LED illuminates when the device is connected to the power supply. LOCK LED: This red LED illuminates when the SDI signal is detected.
- Page 6 Rear Panel SDI INPUT: Use this port to connect the SDI source output from SDI Camera. SDI OUTPUT: Use these ports to connect the SDI displays or monitors with coaxial cable (RG6). DC 5V-12V: Plug the 5V or 12V DC power supply into the unit and connect the adapter to AC wall outlet.
- Page 7 VI. Application Example...
- Page 8 Published by J-Tech Digital, Inc. 12803 Park One Drive Sugar Land, TX 77478...