Table of Contents
Advertisement
FLEXIDOME IP micro 3000i - outdoor | FLEXIDOME
IP turret 3000i IR - outdoor
–
Creating a new user
To create a new user, click Add in the section below Authentication modes.
In the box User, fill in the fields:
1.
2.
3.
4.
4.1.3
Date/Time
Date format
Select the required date format.
Device date/Device time
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all devices are operating on the same time.
1.
2.
Note:
It is important that the date/time is correct for recording. An incorrect date/time setting could
prevent correct recording.
Device time zone
Select the time zone in which the system is located.
Bosch Security Systems B.V.
–
It originates from a Bosch factory that is a secure environment.
–
It has not been tampered with.
The Trusted certificate is issued by Escrypt. Escrypt is a Bosch company and Certificate
Authority (CA).
Active Directory server (AD FS). A check mark in this check box indicates that the device
uses an active directory server.
User name: Enter a name with a minimum of 5 and a maximum of 31 characters.
Group, select the appropriate authorization level:
–
live is the lowest authorization level. At this level, it is only possible to view the live
video image, and switch between the different live image displays.
–
user is the middle authorization level. At this level, it is possible to operate the
device and playback recordings, but configuration changes are not possible.
–
service is the highest authorization level. Entering the correct password gives access
to all the functions, and allows all configuration settings to be changed.
Type, select either:
–
Password for a new password.
Use a minimum of 8 and a maximum of 19 characters. The password must have
upper-case and lower-case letters, one or more numerical digits and one or more of
these special characters ! ? " # $ % ( ) { } [ ] * - = . , ; ^ _ | ~ \
Special characters such as space @ : < > ' & + are not valid.
In this case, enter the new password a second time to eliminate typing mistakes.
–
Certificate for a certificate that the new user is authorized to use.
Click Set to confirm and create a new user.
Enter the current date. Since the device time is controlled by the internal clock, it is not
necessary to enter the day of the week – it is added automatically.
Enter the current time or click Sync to PC to apply the system time from your computer
to the device.
User manual
Configuration | en
15
2020-12 | V01 | F.01U.385.759
Advertisement
Table of Contents
