Table of Contents
Advertisement
2 — Operating and Maintaining the UMAP 2110
MGMT- Speed
(LED B on RJ-45)
MGMT-Link/Act
(LED A on RJ-45)
Interface
GBE1
SFP1
GBE2
SFP2
MGMT
COM
HK
FAN
POTS
LINE
Button
ACO
RST
42 / 54
Orange
100 Mbps
Off
10 Mbps
Green
Active
Off
Inactive
Green - Flash
Data Tx/Rx
Gigabit Ethernet electrical trunk port 1
Gigabit Ethernet optical trunk port 1
Gigabit Ethernet electrical trunk port 2
Gigabit Ethernet optical trunk port 2
Ethernet Port connected to LAN for providing system out-band
EMS/Telnet control interface, such as system monitor, control or software
upgrade.
RS-232 port connected to the terminal for monitoring and controlling the
system.
RJ-50 port for housekeeping inputs and one alarm contact output.
RJ-45 port for connection with the RJ-45 port on the front panel of fan card
to provide power to the fan.
RJ-21 connector (50-pin dual row header) for connecting POTS lines.
RJ-21 connector (50-pin dual row header) for connecting DSL lines.
For Alarm Cut Off service.
An embedded hardware button for hardware resetting.
Description
Description
Advertisement
Table of Contents
