Table of Contents
Advertisement
2.1.4 Electrostatic Discharge Protection
The UMAP 2110 system contains static-sensitive components. Be sure to wear a properly grounded
antistatic wrist strap when handling them. Also, when removing and replacing a card, hold it either
by its front ejector handle or by its edges.
Do not touch its rear connector contacts, which must remain free of contaminants.
2.1.5 Routine Maintenance
Always monitor the UMAP 2110 system performance at the central office/ remote sites using the
SNMP. It allows user to view the current system status, alarm information and to take the necessary
corrective action if a problem is reported.
Also keep each UMAP 2110 system site free of dust and other pollutant that could affect system
performance. In addition, be sure to maintain the environment conditions at the central office and at
each remote system site. The ideal operating temperature is about 20
acceptable operating condition range:
°
-10
C to 65
°
C and 0% to 95% humidity at 35
2 — Operating and Maintaining the UMAP 2110
°
C. The following is the
°
C
39 / 54
Advertisement
Table of Contents
