Table of Contents
Advertisement
Mandatory Regulations
The following sections describe the mandatory regulations that govern the installation and operation of the
UMAP 2110.
List of Terms
Table 1 lists the terms used in this chapter.
Term
CE
EEC
EN
FCC
IEC
General Requirements
The sections that follow outline the mandatory regulations that govern the installation and operation
of the UMAP 2110. You must adhere to these instructions so that your system meets regulatory
requirements.
Danger 1 – When removing cards from a chassis under power, some of the components
such as the DC converters may be extremely hot. Handle by the card guides only.
Warning1 – This unit contains no user-serviceable parts. Refer servicing to qualified
personnel.
Warning 2 – To prevent accidental electrical short circuits, align the card correctly
between the card guides before you insert it in the slot.
Prevention of Access
The UMAP 2110 must be accessible only to authorized personnel. Install this apparatus in a
restricted access location or similar environment to prevent unauthorized access.
EMC Compliance
EMC compliance may require the use of ferrites, shielded cables or other special accessories. Where
required, these special accessories must be installed as per the instructions.
Table 1 List of Terms
Expansion
Conformité Européenne
European Economic Community
European Standards
Federal Communications Commission
International Electrotechnical Commission
Mandatory Regulations
I
Advertisement
Table of Contents
