Table of Contents
Advertisement
1 — Installation of the UMAP 2110
Partition Information
FTP Get in progress:
The following message is displayed during getting file from FTP server.
Firmware Write in progress:
The Flash Write process may take a few minutes; you must not turn off or reset the system during
the process.
Firmware Write successfully:
When the Flash Write process has completed successfully, the Firmware Update Status shows
"Firmware has upgraded already". You can now restart the system.
34 / 54
This section displays the partition information including firmware
version, updating date, and status (active or not). Note that active
partition means the partition for next power-up, not current partition
in use. You can refer to Current Version to know which partition is
the current partition in use. When you update the firmware, new
firmware will be written to the partition that is not currently in use.
Advertisement
Table of Contents
