Advertisement
Step
4
Step
5
or
DeMO PROGRAMS: There are 8 Demo play modes. The Demo play modes
can be configured two ways, by pressing the reset button or by using the
light sensors. If you are using the light sensors you will need to be in a brightly
lit area to select Demo modes.
Look for polarity symbols (+/–) in
battery compartment. Insert batteries
to match up with polarity symbols.
Replace the battery cover by inserting the tabs
on the end closest to the tail wheel first and
then pressing on the cover until it latches into
place. Depending on its programming, when
the S2 detects low battery voltages, it will
slowly start blinking the blue power light.
7
Advertisement
