Step 5 Prepare The Driver Diskette - HighPoint SSD7103 Installation Manual

Linux Ubuntu 19.10 on SSD7103 Installation Guide
Enter the motherboard's Boot List and select start from UEFI USB flash:
c.
Command "Arraycreate.efi" to enter the Utility:
d.
Command "create RAID0 ".
e.
Create RAID0 array with all disks and with maximum capacity.
Command "exit"；
f.
g. For more command usages, refer to Appendix A.

Step 5 Prepare the Driver Diskette

Extract HighPoint_NVMe_Ubuntu_19.10_x86_64_vx.x.x_xx_xx_xx.tar.gz to top(/)
directory of an USB flash drive. It will look like:
- 4 -