Lincoln Electric VRTEX ENGAGE Operator's Manual page 44

VRTEX ® ENGAGE™
28. The lesson overview screen will provide a brief description of the
next lesson (Equipment Setup). Select the Start Lesson icon to
begin the lesson. See Figure B.94.
Figure B.94 – Lesson overview
29. The lesson instruction screen will provide instructions on how
to complete the lesson. See Figure B.95. Read the on-screen
instructions and tap the screen to begin the lesson. The
instructions for this lesson (Equipment Setup) are as follows:
1. Tap the highlighted section.
2. Select the machine that matches the WPS configuration.
3. Adjust the setting on the machine.
4. Tap 'Go' to continue.
Figure B.95 – Lesson instructions
30. This lesson (Equipment Setup) will consist of reading the Weld
Procedure Specification (WPS) and applying the correct settings to
Lincoln welding equipment. As the user completes each portion
of the lesson, select the Go icon to continue to the next portion of
the lesson. Tap the highlighted selection to begin the next portion
of the lesson. See Figure B.96.
Figure B.96 – Equipment setup
31. When all portions of the lesson are complete, the screen will
display Completed. Select the End icon to continue. See Figure
B.97.
Figure B.97 – Lesson complete
32. The lesson overview screen will now be displayed and the
progress will be updated to reflect the user progress. See Figure
B.98. Select the Retry Lesson icon to retry the lesson. Select the
Go To Next Lesson icon to begin the next lesson.
Figure B.98 – Lesson overview
B-28
OPERATION (USER MODE)