Product-Specifi C Safety Instructions - Bosch rexroth ActiveShuttle Operating Manual

2.6 Product-specifi c safety instructions
General • Do not attempt to modify the product (software or hardware).
• Do not expose the product to any mechanical loads under any circumstances.
• Always secure the product against tipping over.
During transport • Observe the transport instructions on the packaging.
• Inspect the product for obvious transport damage.
During assembly
• Make sure the system component you are working on is depressurized and
During commissioning • Allow the product to acclimatize for a few hours prior to commissioning in order to
• Only start up a product that has been completely installed.
• Make sure that all the safety equipment which forms part of the product is present,
• Check the product for malfunctions.
During operation • Make sure that only authorized personnel perform the following tasks within the
• Only allow people to be in the immediate vicinity of the product when it is
• Do not reach into moving parts.
• An idle system is not necessarily a safe system, as stored energy can be released
• After a malfunction, only switch the system back on once you have established and
EMERGENCY STOP,
malfunction
• Make sure that access to maintenance and inspection points is kept unobstructed.
During servicing
and repair • Make sure that no line connectors, connections or components are disconnected
• Dispose of the product in accordance with the regulations in your country.
During disposal
Never use the product as a handhold or step. Do not place any objects
on the product.
de-energized before assembling the product or inserting or removing plugs.
prevent water condensation from forming in the housing.
has been properly installed, and is fully functional. Do not move, bypass or disable
any safety equipment.
scope of the product's intended use:
– Starting or operating the system or interfering with its normal operation.
– Operating component or part adjusters.
operating if they are authorized by the owner to be there. This also applies when
the product is idle.
unintentionally or through improper maintenance procedures.
rectifi ed the cause of the fault.
as long as the system is supplied with pressure and voltage. Secure the system
against being switched back on.
3 842 560 864/2021-10, ActiveShuttle: Lithium-ion battery, Bosch Rexroth AG
Safety instructions 9/32