Adjusting Screen; Zoom Adjustment; Focus Adjustment; Lens Shift Adjustment - Christie 38-VIV210-01 User Manual

BASIC OPERATION
Press ZOOM L/M button on Top Control. Message "Zoom" is
1
displayed.
Press ZOOM L button to make image larger, and press ZOOM
2
M button to make image smaller.
Press FOCUS L/M button on Top Control. Message "Focus" is
1
displayed.
Adjust focus of image by pressing FOCUS L/M button(s) .
2
1 Press LENS SHIFT button on Top Control. Message "Lens shift"
is displayed.
2 Press POINT UP button to move image up, press POINT DOWN
button to move image down.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
1 Select Keystone on SETTING menu. (Refer to page 33.)
Keystone dialog box appears.
2 Correct keystone distortion by pressing POINT UP/DOWN
button(s). Press POINT UP button to reduce upper part of
image, and press POINT DOWN button to reduce lower part.
Reduce upper width with POINT UP button.
18

ADJUSTING SCREEN

ZOOM ADJUSTMENT

FOCUS ADJUSTMENT

LENS SHIFT ADJUSTMENT

KEYSTONE ADJUSTMENT

Reduce lower width with POINT DOWN button.
Zoom
Message disappears after 4 seconds.
Focus
Message disappears after 4 seconds.
Lens shift
Message disappears after 4 seconds.
• Arrows are white in no correction.
• Arrow(s) of direction being corrected turn(s) red.
• Arrow(s) disappear(s) at the maximum correction.
• If you press the KEYSTONE button on Remote
Control Unit once more while the keystone dialog box
is being displayed, the keystone adjustment will be
canceled.
• Keystone function can not be operated when
"NATURAL WIDE" is selected on PICTURE SCREEN
Menu (P32).
• If you select "NATURAL WIDE" after adjusting the
keystone, the adjustment will be canceled.