Table of Contents
Advertisement
VIDEO INPUT
DIRECT OPERATION
Select INPUT source by pressing INPUT
Control.
MENU OPERATION
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to select Input and press SELECT
button. Another dialog box INPUT SELECT Menu will appear.
2
Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to INPUT source that you want to select, and then
press SELECT button.
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA
(refer to "COMPATIBLE COMPUTER SPECIFICATIONS" on page 21). When selecting Computer, this projector
automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting
manually.)
Note : Projector may display one of following messages.
When projector can not recognize connected signal as
Auto
PC system provided in this projector, Auto PC Adjustment
function operates to adjust projector and message "Auto"
is displayed on SYSTEM Menu icon. (Refer to P22.)
When image is not provided properly, manual adjustment
is required. (Refer to P23 and 24.)
There is no signal input from computer. Make sure
––––
connection of computer and a projector is set correctly.
(Refer to TROUBLESHOOTING on page 41.)
This projector automatically selects PC system among those provided
in this projector and PC system can be also selected manually.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to PC
SYSTEM Menu icon.
2
Press POINT DOWN button to move a red arrow pointer to
system that you want to set, and then press SELECT button.
20
SELECTING INPUT SOURCE
L/M
button on Top
SELECTING COMPUTER SYSTEM
AUTOMATIC MULTI-SCAN SYSTEM
SELECT COMPUTER SYSTEM MANUALLY
INPUT L/M buttons
INPUT 1
INPUT 2
INPUT 3
INPUT Menu icon
PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being
selected.
PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1~5) set in PC
ADJUST Menu. (P24)
Advertisement
Table of Contents
